Hardware Components
Rilco provides a wide-range of hardware components ranging from a complex pipe alignment guide to a simple washer.
Hardware Categories
- Beam Clamps and Attachments
- Rods and Accessories
- Pipe Clamps
- Steel Brackets and Channel Assemblies
- Pipe Rollers
- Pipe Saddles
- Pipe Alignment Guides
- U-Bolts and Straps
- Bolts, Nuts and Washers
Hardware Materials
- Carbon Steel
- Stainless Steel
- Alloy/Chrome
Hardware Finishes
- As is (No coating applied)
- Galvanized (all types)
- Painted/Coated to customer specifications
Beam Clamps & Attachments
Welded Beam Attachment (Rilco Part # 100)
| Size Range: | 0.375” to 3.5″ |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Recommended for attachment to bottom of steel where extreme loads are present and rod sizes are large |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 22) |
| How To Size: | Size of attachments is determined by size of rod |
| How To Order: | Specify rod size, part number, name, and finish. Specify (with bolt and nut) if required for 1” rod size and smaller. Specify (with pin and cotter pins) if required for 1.25” inch rod size and larger |
Concrete Pin Lug (Rilco Part # 101)
| Size Range: | For use with rod sizes 0.375” to 2” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Structural attachment to concrete ceiling where flexibility is desired. Concrete Pin Lug is normally used in conjunction with Rilco part # 295 weldless eye nut (right-hand thread) or Rilco part # 220 hanger rod eye nut (right hand thread) |
| How To Order: | Specify rod size, Part number, name, and finish. |
Concrete Rod Attachment (Rilco Part # 102)
| Size Range: | For use with rod sizes 0.375” to 1” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Structural attachment to concrete ceiling where vertical adjustment is desired. Normally used with threaded rod and nut |
| How To Order: | Specify rod size, part number, name, and finish |
Beam Lug Attachment - Two Holes (Rilco Part # 104)
| Size Range: | For use with rod sizes 0.5“ to 2.5″ |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | For single rod suspension of part # RCS 81– H, Type B & C Constant Supports |
| How To Order: | Specify rod size, part number, name, finish, and “H” dimension. (See Catalog sheet) |
Beam Lug Attachment - One Hole (Rilco Part # 105)
| Size Range: | Short lug is available for use with 0.5” to 3.75” rod; long lug may be used with 0.5” through 2“ rod |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | For attachment to structural steel in conjunction with part #290 clevis and with type B and C spring hanger. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 57) |
| How To Order: | Specify rod size, part number, name, finish, and whether short or long lug is required |
Concrete attachments - Single Lug (Rilco Part # 106)
| Size Range: | For use with rod sizes 0.5“ to 2” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Structural attachment to concrete ceiling Lug is used in conjunction with part # 290 forged steel clevis |
| How To Order: | Specify rod size, part number, name, and finish |
Washer Plate (Rilco Part # 110)
| Size Range: | For use with 0.375” to 3.75” rod |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | The heavy-duty washer plate is used on top of channels or angles for supporting pipe with rods or U-bolts |
| How To Order: | Specify rod size, part number, name, and finish |
Beam Clamps - Standard (Rilco Part # 125). Heavy Duty (Rilco Part # 126)
| Size Range: | Standard: 4” to 8” Heavy Duty: ” to 12″ |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Components: | Two half-clamps, pipe spacer and bolt with nut (assembled). |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 21) |
| How To Order: | Specify figure number, width of flange, name, and finish. |
Beam Clamps - Adjustable (Rilco Part # 130)
| Size Range: | 0.375” to 0.0625” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Recommended for supporting pipe from the bottom flange of beams |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 27) |
| How To Order: | Specify rod size, part number and finish |
Hanger Rods & Accessories
Machine Threaded Both Ends Rod - Right Hand (Rilco Part # 200), Right and Left Hand (Rilco Part # 210)
| Size Range: | 0.375” to 3.75” |
| Material Types: | Carbon Steel Rod. |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Maximum Temperature: | 650°F. |
| How To Order: | Specify rod size, part number, name, finish, and rod length. Specify thread length if other than standard |
Continuous Threaded Rod (Rilco Part # 205)
| Size Range: | 0.25” through 1.5” |
| Material Types: | Carbon Steel Rod (Threaded complete length). |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Maximum Temperature: | 650°F |
| How To Order: | Specify rod diameter, length, part number, name, and finish |
Eye Rod - Not Welded . Right Hand thread (Rilco Part # 220). Left Hand thread (Rilco Part # 221).
| Size Range: | 0.375” to 2.5″ |
| Material Types: | Carbon Steel Rod |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Maximum Temperature: | 750°F |
| How To Order: | Specify rod diameter, part number, name, finish, and rod length. Specify thread length if other than standard. |
Eye Rod - Welded. Right Hand Thread (Rilco Part # 225). Left Hand Thread (Rilco Part # 226)
| Size Range: | 0.375” to 2.5″ |
| Material Types: | Carbon Steel Rod |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Maximum Temperature: | 650°F |
| How To Order: | Specify rod diameter, part number, name, finish, and rod length. Specify thread length if other than standard. |
Linked Eye Rod. Not Welded (Rilco Part # 222. Welded (Rilco Part # 230)
| Size Range: | 0.375” to 2.5” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specification |
| Service: | The use of linked eye rods in a hanger assembly allows universal movement of the piping without bending and possible fracture of a straight rod |
| How To Order: | Specify the length and size of each eye rod by part number |
Eye-End Rod (Rilco Part # 235)
| Size Range: | Rod sizes 2.75” to 5” |
| Material Types: | Carbon Steel. |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Service: | A large diameter rod with eye end for load ratings from 41,580 to 154,000 pounds |
| How To Order: | Specify rod size, part number, name, finish and “L” dimension. Indicate if desired thread length is other than standard |
Fabricated Turnbuckle (Rilco Part # 280)
| Size Range: | For use with rod sizes 1.25” to 5“ |
| Material Types: | Carbon Steel. |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | Provides adjustments up to 24 inches with loads from 8,000 to 154,000 pounds |
| How To Order: | Specify rod size, part number, name, finish, and opening dimension |
Rod Coupling (Rilco Part # 281)
| Size Range: | For use with rod sizes 0.375” to 1“ |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or custom coated to customer specifications |
| Service: | For connecting rods to accommodate up to 1” inch diameter and support up to 4960 pounds |
| How To Order: | Specify rod size, part number, name, and finish |
Turnbuckle (Rilco Part # 285)
| Size Range: | 0.375” to 2.5” |
| Material Types: | Forged Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Service: | Provides adjustment up to 12” inches for heavy loads. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 13). |
| How To Order: | Specify rod size, part number, name, and finish. Stub ends furnished only upon request. |
Clevis Pin With Cotters (Rilco Part # 289)
| Size Range: | 0.5” to 4” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For use with type C variable spring hanger, type C constant support (Fig. 81-H only) and Part #100 welded beam attachment. |
| How To Order: | Specify pin diameter, part number, name, and finish |
Forged Steel Clevis (Rilco Part # 290)
| Size Range: | 0.375” to 4” |
| Material Types: | Forged Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For use on hot temperature piping installation |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 14) |
| How To Order: | Specify rod size, part number, name, and finish. If pin and cotter pins are required, specify “with pin” |
| If other than standard combination of clevis size and rod tapping size is required, specify clevis number, special rod tapping size, pin size, grip |
Welless Eye Nut (Rilco Part # 295)
| Size Range: | 0.375” to 2.5” |
| Material Types: | 33,500 lbs. |
| Finish: | Forged Carbon Steel |
| Service: | Black or Electro-galvanized or coated to customer specification |
| Approvals: | For use on high temperature piping installations. Complies with Manufactures Standardization Society SP-69 (Type 17) |
| How To Order: | Specify rod size, part number, name, and finish. If other than standard combination of eye nut and rod size, specify eye nut size and special rod tapping size |
Pipe Clamps
Minimum Pipe Clamp. Standard (Rilco Part # 300), Heavy Duty (Rilco Part # 305)
| Size Range: | Standard: 1/2” to 30”. Haevy Duty: 3″ to 42″. |
| Material Types: | Carbon Steel. |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Applications: | Recommended for suspension of cold or hot pipe lines where no insulation is required. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 4) |
| Maximum Temperature: | 750° F ( 398°C) |
| How To Order: | Specify pipe size, part number, name and finish. |
Double Bolt Pipe Clamp - Standard Carbon Steel (Rilco Part # 310)
| Size Range: | 3/4” to 36”. |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Applications: | Recommended for suspension of pipe requiring insulation and where flexibility of the clamp is desirable – within the limitation of temperature and loads shown below. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 3). |
| Maximum Temperature: | 750° F ( 398°C) |
| How To Order: | Specify pipe size, part number, name and finish. |
Double Bolt Pipe Clamp - Alloy (Rilco Part # 310A).
| Size Range: | 1 1/2” to 24” |
| Material Types: | Chrome molybdenum steel (ASTM A-387 Grade 22). |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Applications: | Recommended for suspension of high temperature pipe requiring insulation. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 3). |
| Maximum Temperature: | 1050°F ( 565°C) |
| How To Order: | Specify pipe size, part number, name and finish. |
Double Bolt Pipe Clamp - Heavy Duty Carbon Steel (Rilco Part # 315).
| Size Range: | 6” to 36”. |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Applications: | Recommended for suspension of pipe requiring insulation and where flexibility of the clamp is desirable – within the limitation of temperature and loads shown below. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 3). |
| Maximum Temperature: | 750° F ( 398°C) |
| How To Order: | Specify pipe size, part number, name and finish. |
Yoke Pipe Clamp - Alloy (Rilco Part # 320)
| Size Range: | 4” to 16” |
| Material Types: | Chrome molybdenum steel except U-bolt which is stainless steel. |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Applications: | Recommended for suspension high temperature pipe requiring up to 4″ inches of insulation. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 2) |
| Maximum Temperature: | 1050°F (565°C) |
| How To Order: | Specify pipe size, part number, name and finish. |
Yoke Pipe Clamp - Heavy Duty Alloy (Rilco Part # 325)
| Size Range: | 10” to 24” |
| Material Types: | Chrome molybdenum steel except U-bolt which is stainless steel. |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Applications: | Recommended for suspension high temperature pipe requiring up to 6″ of insulation. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 2) |
| Maximum Temperature: | 1075°F ( 580°C) |
| How To Order: | Specify pipe size (nominal and exact), part number, name and finish. Special Alloy filler plates will be provided, at an extra charge, when the O.D. of the pipe size is other than standard, Installation instructions are attached to the clamp when the filler plates are required. |
Riser Clamps - Single Bolt (Rilco Part # 360)
| Size Range: | 3/4” to 24” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | For bare or insulated pipe to stabilize pipe or insulation material. Can be used to hold insulation on vertical lines to minimize insulation slippage. |
| Maximum Temperature: | 650°F ( 343°C) |
| How To Order: | Specify pipe size, part number, name and finish. |
Riser Clamp - Standard (Rilco Part # 361)
| Size Range: | 2” to 24” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Riser Clamps are used for the support of vertical piping |
| Maximum Temperature: | 650°F (343°C) |
| How To Order: | Specify pipe size, part number, name and finish. |
3-Bolt Pipe Clamp - Non Standard (Rilco Part # 363)
| Material Types: | Carbon Steel, chrome molybdenum or stainless steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Recommended for suspension of high temperature pipe requiring insulation |
| Maximum Temperature: | As required |
| How To Order: | RILCO part #363 Double Bolt Pipe Clamp, material type, pipe size, load, operating temperature, insulation thickness. Alloy clamps, unless otherwise specified, will be furnished with alloy studs made from ASTM spec. A-193-B7 stud stock with the center third unthreaded, and hex nuts. |
2-Bolt Pipe Clamp - Non Standard (Rilco Part # 364)
| Material Types: | Carbon Steel, chrome molybdenum or stainless steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Recommended for suspension of high temperature pipe requiring insulation |
| Maximum Temperature: | As required |
| How To Order: | RILCO part #364 Single Bolt Pipe Clamp, material type, pipe size, load, operating temperature, insulation thickness. Alloy clamps, unless otherwise specified, will be furnished with alloy studs made from ASTM spec. A-193-B7 stud stock with the center third unthreaded, and hex nuts |
Clevis Hanger - Adjustable (Rilco Part # 381)
| Size Range: | 0.5” to 30” |
| Material Types: | Carbon Steel or Stainless Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Applications: | Recommended for suspension of stationary pipes |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 1). |
| Maximum Temperature: | 450°F (323°C) |
| How To Order: | Specify pipe size, part number, name and finish |
Clevis Hanger - Insulated (Rilco Part # 382)
| Size Range: | 0.375” to 12” inches. Other sizes available upon request. Refer to Rilco Manufacturing “Insulated Pipe Support Catalog” for outside dimensions of insulated pipe supports. |
| Material Types: | Carbon Steel or Stainless Steel |
| Finish: | Black, Galvanized, or coated to customer specifications. |
| Applications: | Recommended for suspension of stationary pipes |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 1) |
| Maximum Temperature: | 450°F (323°C) |
| How To Order: | Specify pipe size, part number, name and finish |
Steel Brackets & Channel Assembly
Steel Bracket - Light Weight (Rilco Part # 400)
| Maximum Load: | 750 pounds. |
| Material Types: | Carbon steel bracket |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | Recommended for support from below |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 31) |
| How To Order: | Specify bracket number, part number, name, and finish. Order hanger rods and hex nuts separately |
Steel Bracket - Medium Weight Welded (Rilco Part # 410)
| Maximum Load: | 1,500 lbs. |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | Recommended for the support of loads up to 1,500 lbs. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 32) |
| How To Size: | Determine size by dimensions most suitable to the installation (see dimensions of standard brackets below). Special welded steel brackets can be furnished to order |
| How To Order | Specify bracket number, part number, name, and finish. Order separately: bolts, nuts, and back |
Steel Bracket - Heavy Weight Welded (Rilco Part # 420)
| Maximum Load: | 3,000 lbs. |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | Recommended for the support of loads up to 3,000 lbs. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 33) |
| How To Size: | Determine size by dimensions most suitable to the installation (see dimensions of standard brackets below). Special welded steel brackets can be furnished to order |
| How To Order: | Specify bracket number, part number, name. Order separately: bolts, nuts, and back plates for fastening brackets to wall. Specify size and length of bolts size, thickness and drilling of plates. Orders for special brackets are to be accompanied by a detailed sketch |
Channel Assembly (Rilco Part # 440).
| Material Types: | Channel – Carbon Steel (ASTM A36) Washer plate– Carbon Steel (ASTM A36 or A515 GR 65-70) |
| Finish: | Black, Galvanized, or coated to customer specifications |
| How To Order: | Specify part number 440 Channel Assembly, channel size, rod size, c-c dimension |
Pipe Rolls
Pipe Roll Stand Part # 500)
| Size Range: | 2” to 42” pipes |
| Material Types: | Cast iron roll and stand |
| Finish: | Black, Galvanized, or coated to customer specs |
| Service: | For support of pipe where longitudinal movement resulting from expansion and contraction may take place but vertical adjustment is unnecessary |
| How To Size: | If roll is to support bare pipe, select the size directly from nominal pipe size. If used with a pipe covering select O.D. of protection saddle |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 44) |
| How To Order: | Specify pipe roll size, part number, name, and finish. Be certain to order oversized rolls where insulation makes this necessary. Pipe Rolls available without stand (part# 502) and Axle (part# 501) |
Base Plate (Rilco Part # 510)
| Size Range: | 2” to 42” pipe |
| Material Types: | Cast iron plate |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | (When used with Part #500) For support of pipe lines where longitudinal movement resulting from expansion and contraction may take place and where vertical and lateral adjustment during installation is necessary |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 46) |
| How To Order: | Specify pipe roll size in order to receive the correct plate size |
Roller Chair (Rilco Part # 535).
| Size Range: | 2” to 30” pipe. |
| Material Types: | Cast iron roll, Carbon Steel chair, roll rod, bolts and hex nuts |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For support of pipe where longitudinal movement due to expansion and contraction may occur, but where no vertical adjustment is needed |
| How To Size: | If roll is to support bare pipe, select the size directly from nominal pipe size. If used with a pipe covering select O.D. of protection saddle |
| How To Order: | Specify size of roll, part number, name and finish. Be sure to order oversized rolls when insulation and protection saddle are needed |
Adjustable Yoke Pipe Roll (Rilco Part # 536).
| Size Range: | 2.5” to 24” pipe. |
| Material Types: | Cast iron roll, carbon steel yoke, roll rod, bolts and hex nuts |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For suspension of pipe from a single rod where horizontal movement due to expansion and contraction may occur |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 43) |
| How To Size: | If roll is to support bare pipe, select the size directly from nominal pipe size. If used with a pipe covering select O.D. of protection saddle |
| How To Order: | Specify size of roll, part number, name and finish. Be sure to order oversized rolls when insulation and protection saddle are needed |
Adjustable Pipe Roll Support (Rilco Part # 540).
| Size Range: | 1” to 30” pipe |
| Material Types: | Cast iron roll and sockets, Carbon Steel roll rod, continuous thread rods and hex nuts |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For support of pipe where horizontal movement due to expansion and contraction may occur and where verticle adjustment up to 6″ may required |
| Approvals: | Complies with MSS-SP-69 (Type 41) |
| How To Size: | If roll is to support bare pipe, select the size directly from nominal pipe size. If used with a pipe covering select O.D. of protection saddle |
| How To Order: | Specify size of roll, part number and name. Be sure to order oversized rolls when insulation and protection |
Single Pipe Roll Support (Rilco Part # 545).
| Size Range: | 1” to 30” pipe |
| Material Types: | Cast iron roll and sockets, carbon steel roll rod, continuous thread rods and hex nuts |
| Finish: | Black, Galvanized, or coated to customer specification |
| Service: | For suspension of pipe where longitudinal movement due to expansion and contraction may occur |
| Approvals: | Complies with federal specification A-A-1192A (Type 41), WW-H-171-E (Type 42) and MSS-SP-69 (Type 41) |
| How To Size: | If roll is to support bare pipe, select the size directly from nominal pipe size. If used with a pipe covering select O.D. of production saddle |
| How To Order: | Specify size of roll, part number, name, and finish. Be sure to order oversized rolls when insulation and protection saddle are needed. Hanger rod and nuts to be ordered separately |
Spring Cushion Hanger (Rilco Part # 550)
| Material Types: | Spring cushion hanger is composed of a set of two springs and four cast iron retainers |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | Usually used in installations where formal load and movement calculations are not required |
| Approvals: | Complies with MSS-SP-6 (Type49) |
| How To Size: | If roll is to support bare pipe, select the size directly from nominal pipe size. If used with a pipe covering select O.D. of protection saddle |
| How To Order: | Specify part number, name, and finish. The retainers’ center hole can be drilled or reamed larger in order to adjust to the rod size of the pipe roll |
Horizontal Traveler (Rilco Part # 580)
| Size Range: | Available in four sizes able to take up to 20,700 (lbs.). All sizes provide up to 12” inches of horizontal travel |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Installation: | Part ready for installation. May be attached to existing support by welding around the frame |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 58) |
| How To Order: | Specify size, part number, name and “H” dimension, if necessary |
Saddles, Stanchion & Alignment Guides
Protection Saddles (Rilco Part # 600-606A)
| Size Range: | 3/4” to 36” pipe |
| Material Types: | Parts 600-605 are curved carbon steel plates; Part 606A and 607A are alloy steel material (A387 Grade 22) with a center plate for all pipe sizes. Parts 600-605 have a center plate for pipe sizes 12” inches and larger only. All saddles are 12” long |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For insulation protection and where heat losses are to be kept at a minimum. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 39A or Type 39B) |
Insulation Shield (Rilco Part # 615)
| Size Range: | 0.5” to 24” pipe with 0.5”, 0.75” up to 1”, 1.5” and 2” thick insulation |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized or Painted |
| Service: | Recommended for outside of foam or fiberglass insulation for distribution of loads to preclude crushing of insulation without breaking the vapor barrier. May be used with Parts number 380 and 381 |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 40) |
| How To Order: | Specify size, part name, part number, and finish. Sizes other than shown on data table available upon request |
Adjustable Pipe Saddle (Rilco Part # 650).
| Size Range: | 2.5” to 36” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customers specifications |
| Service: | Stanchion type support where vertical adjustment of stationary pipe is needed. |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 38) |
| Installation: | Adjustment is made by turning the locknut. The lower end of the locknut is staked, upsetting the threads to prevent separation of locknut and coupling during adjustment. |
| How To Order: | Specify part number, name, finish and pipe size to be supported. |
Pipe Saddle Support (Rilco Part # 660).
| Size Range: | 4” to 36” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customers specifications |
| Service: | Stanchion type support where vertical adjustment of stationary pipe is needed |
| Approvals: | Complies with Manufacturers Standardization Society SP-69 (Type 37) |
| Installation: | Adjustment is made by turning the locknut. The lower end of the locknut is staked, upsetting the threads to prevent separation of locknut and coupling during adjustment |
| How To Order: | Specify part number, name, finish and pipe size to be supported |
Adjustable Pipe Stanchion Saddle With U-Bolt (Rilco Part # 662)
| Size Range: | 2” to 12” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | Stanchion type support where vertical adjustment of stationary pipe is needed |
| How To Order: | Specify part name, number, finish and pipe size to be supported |
Adjustable Pipe Saddle Support (Rilco Part # 664)
| Size Range: | 2” to 12” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | Stanchion type support where vertical adjustment of stationary pipe is needed |
| How To Order: | Specify part name, number, finish and pipe size to be supported |
Pipe Alignment Guide - Medium Duty (Rilco Part # 680)
| Size Range: | 1” to 24” pipe with 1” to 4” of insulation. |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For maintaining alignment of piping through its axial expansion and contraction cycles |
| How To Order: | Specify finish, pipe size and insulation thickness |
Pipe Alignment Guide - Heavy Duty (Rilco Part # 690)
| Size Range: | 1” to 24” pipe with 1” to 4” of insulation |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized, or coated to customer specifications |
| Service: | For maintaining alignment of piping through its axial expansion and contraction cycles |
| How To Order: | Specify finish, pipe size and insulation thickness |
U-Bolts & Straps
Standard U-Bolt (Rilco Part # 700)
| Size Range: | 0.5” to 6” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized or coated to customer specifications |
| Service: | For restraint of pipe |
| How To Order: | Specify part number, name, finish |
Pipe Strap - Flat (Rilco Part # 711)
| Size Range: | 0.5” to 6” |
| Material Types: | Carbon Steel |
| Finish: | Black, Galvanized or coated to customer specifications |
| Service: | For restraint of pipe |
| How To Order: | Specify part number, name, finish |
Pipe Strap - Round (Rilco Part # 712)
| Size Range: | 0.5” to 6” |
| Material Types: | Carbon Steel. |
| Finish: | Black, Galvanized or coated to customer specifications |
| Service: | For restraint of pipe |
| How To Order: | Specify part number, name, finish |
